Ask The Expert

* When using Z value for M&S P115B and P115C don\'t forget you must enter the minimum performance requirement set by the Retailer (usually 6.0 kgf)into the the limits field. The software can\'t work out the Z Value for M&S without it. You will find this in the Miscellaneous Field below the comments box; so just key it in the lower limit box. * Also when you go onto start testing you can also switch on the Pass/Fail box by clicking on View and selecting Pass/Fail from the drop down menu. By doing this it will warn you if any specimen has failed. * Before you print off your results check in Report wizard: Reporting - check that the limits box is ticked as a default. In -Statistics make sure you\'ve requested Z value. * Close down and Print your report. You should see clearly what lower limit you have set above your results column and any failures will be high lighted in RED plus an asteris for those who do not have a colour printer. If you need to know more email me your name and contact number and I will be happy to give you further advise.